How do I customize my bed?

  1. How do I customize my bed?

    Standard Options:

    • 14 Gauge Steel Tubing Frame

      •
    • Black or Rust Finish

    • Restraint D-Rings on All Four Top Corners

      •
    • Restraint D-Rings on All Four Corners at Mattress Level

      •
    • Reinforced Bed Frame Attachment Points

      •
    • 4 Restraint D-Rings Along both sides of Bottom Bed Rails

    • 5” of clearance under bottom bed rails (can be raised/lowered upon request)

    Additional Options:


    Votive Lighting

    • Available for all beds except The LoadingDock Bed

      •
    • For Folsom, SilverLake and RawHide models, Votive lighting is added to upper bed rail just above the headboard pattern

      •
    • Prices are based on Full/Queen Size or King/CalKing Size

      •
    • 2" Clear or Frosted votive glass available for an additional charge

    Top Rail Restraints

    • Can be added to top rails for any bed style and bed size

      •
    • Adds 4 Restraint D-Rings along both sides of Top Bed Rails in matching position to Bottom Bed Rails

    Top Rail Crossbars

    • Requires the addition of Top Rail Restraints to your Top Bed Rails

      •
    • Can be added to Any Size Bed, but individual bars are not chin-up bars and not meant to support the weight of a person...grabbing hold for support or for a lift is fine but we do not guarantee them to individually support the weight! They should be used collectively to distribute the weight when supporting a sleep-sack!

      •
    • Four (4) 7/8” Thick Solid Hammered 14 Gauge bars with removable caps on one end for easy install and removal

    Permanent St. Andrews Cross Footboard

    • Replaces current footboard with a permanent St. Andrews Cross as foot of bed

      •
    • Available for any bed style and any bed size

      •
    • Eight (8) D-Ring attachment points come standard with Cross

    Portable St. Andrews Cross

    • Usable with any bed style and any bed size

      •
    • Easily rests on the Top Bed Rails on the side of the bed with locking pin to secure it

      •
    • The addition of the Optional Closed-Off Footboard Top Rail makes cross usable at the foot of bed

    Sling Extender Bars

    • Requires the addition of Top Rail Restraints to your Top Bed Rails

      •
    • Usable with any bed style and any bed size

      •
    • Easily attaches to end of Top Bed Rails for use, are removable, and tuck conveniently under the bed when not in use

    XL Sling Extender Bars

    • DOES NOT require the addition of Top Rail Restraints, since the restraint points are added to the bars themselves

      •
    • Usable with any bed style and any bed size

      •
    • Easily attaches to end of Top Bed Rails for use, are removable, and tuck conveniently under the bed when not in use

    Single Hanging Shelf

    • Usable with any bed style and any bed size

      •
    • Easily slips over side bed rails and slides along felted inner lining, stores easily under bed when not in use

      •
    • Usable with Top Rail Crossbars, but will not slide with those crossbars in place

    Additional Restraint Hoops/D-Rings

    • Can be added to any bed style and any bed size

      •
    • Requires instructing DungeonBeds during the checkout process, in the “additional instructions” field, to contact customer directly for placement location of D-Rings

    Removable Curtain Rods on All Three Sides

    • Can be added to any bed style and any bed size

      •
    • Curtain rod holes are placed below Top Bed Rails for installation of curtain rods

      •
    • Three (3) 5/8” Thick Solid Hammered 14 Gauge bars, notched to lock in place, are provided for easy installation along bed sides and bed front

      •
    • Prices are based on Full/Queen Size or King/CalKing Size

    Closed-Off Footboard

    • Can be added to any bed style and any bed size

      •
    • A Top Rail is added to the Footboard to close it off (similar to the look of the headboard. The standard design of all beds leaves this portion of the footboard open

      •
    • NOTE: one of the advantages to adding this rail to the footboard is the ability to use your sling extender bars from the side of your bed, in addition to the standard use at the foot of your bed

      •
    • Prices are based on Full/Queen Size or King/CalKing Size

    Under-Bed Cage Assembly

    • Can be added to any bed style and any bed size

      •
    • Bed rails are raised to a standard 30-31” height to allow room for a cage underneath

      •
    • Ideally suited for a platform bed set-up. Additional bed slats are added to support a mattress. We recommend a ½”+ plywood base (not included) be added on top of the bed slats to support a mattress

      •
    • Plate steel can be used to support the mattress in lieu of wood (for an additional charge) to provide a more complete and secure “cage” environment

      •
    • Prices are based on Full, Queen, King or CalKing Sizes



    [Back To Top]